water pump/lower unit - Page 4

tsubaki · #31 05-22-2007, 06:23 PM

Most manufacturers have put these stamps in the powerhead because of the likelyhood of removal of the stickon barcode labels. If you have them labels most likely there is one of these serial # stamps on the powerhead.

tsubaki · #32 05-22-2007, 06:50 PM

This is off a 75hp mariner.

The location on it is lower rear, starboard side of powerhead.

tsubaki · #33 05-22-2007, 06:51 PM

Sean · #34 05-22-2007, 09:02 PM

tsubaki thanks again for all of your help!

I fond the stamp, serial # is 0G351669

The bad part is I was on the phone with iboats for 15 min, then Westmarine the same and niether of them can help me :'( they both sent me to sierra something or other that only deals with inboard engines! They said I would b=probably need to go directly to a dealer!
THis is not looking good for this weekends fishing trip! :-/

tsubaki · #35 05-22-2007, 09:18 PM

That booger should be around and not be a biotch to get. I'll look, don't expect much from me. ;D

Sean · #36 05-22-2007, 09:22 PM

You'r my hero :-*

In all seriousness Thank you very much!!
I've looked every were and can't seem to find anything solid over 90hp engine :P

tsubaki · #37 05-22-2007, 09:35 PM

Just posting this for reference
COMPLETE WATER PUMP KIT #12094 65-225 HP w/ LARGE METAL PUMP HOUSINGup one level ***124; next Mercury Mariner Force Outboard COMPLETE WATER PUMP KIT #12094 OEM: 46-43024A7

65-225 HP w/ LARGE METAL PUMP HOUSING

Price 1
SKU Name MSRP 1+ Qty.
12094 COMPLETE WATER PUMP KIT #12094 65-225 HP w/ LARGE METAL PUMP HOUSING $105.25 $84.20

tsubaki · #38 05-22-2007, 09:38 PM

http://cgi.ebay.com/ebaymotors/MERCU...QQcmdZViewItem

tsubaki · #39 05-22-2007, 09:39 PM

Again just looking. Not real sure these are correct
http://www.marinewholesale.com/24801...ter-Pumps.html
http://www.mercurypartsexpress.com/P...e/homepage.asp
This one is for 1985 and newer
Item#150-18-3319
Water Pump Repair Kit

For 150 horsepower Mercury/Mariner with Ser# A904646 & up. Complete with parts as pictured.

Your price: $64.58

Sean · #40 05-22-2007, 09:46 PM

Ya, you would think I could just type in my info, then Wala! Water Pump, but Noooo.
I am going to take of the lower Unit tomorrow, (was going to doit today but my buddy has all of my tools!!) and then see what the impellar looks like. maybe for know I will just change that out. If i had good preasure I wouldn't even be worried, but @ idle or under say 1500rpms I just have a inconsistent spitting stream ::)