Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > How To
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Unread 10-31-2005, 02:52 AM
Skools Out's Avatar
Skools Out Skools Out is offline
God
 
Join Date: Jul 2007
Location: Graham / Emerald Isle, NC
Posts: 5,926
Default Loading from Block to Trailer 101

First Line up the trailer by hand then wet the runners be bunks or rollers helps load easier.





Take a floor jack and center it mid ways back to five ft from the bow, then jack the boat off the blocks in the front


then start to wench the trailer under the boat.


Notice the back is still supported by jack stands in the case of my boat usually blocks.


Once the boat trailer is to the floor jack let the jack down which will lift the front of the trailer.


But before letting the jack all the way down set the front blocks between the rear blocks and the trailer


Start to wench the boat on the trailer it will have the trailer still lifted up in the front. *
[img]
http://i8.photobucket.com/albums/a46/Skools_Out/other/Trailer-009S.jpg[/img]


Keep wenching the boat on to the trailer the trailer will finally come down to the ground slowly then remove all the blocks from the boat. It will wench the rest of the way on easily now. then tow it home lol.


Notice i changed the trailers wench post and bow stop. That was so the boat would move 3 inches forward and would work better on heigth for the front of the boat.


__________________




1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:51 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.