Rod holder ?

[BillTex]

Originally Posted by SkunkBoat

I looked at those before.Would love to have them. The ovals would barley fit(only straight back) and the hole will take most of the wood.
My memory tells me the top, flat surface of the gunnel is 4 1/4" on my 1984 V20cuddy.

You can get 2 regulars in each gunnel aft of the rod box and one forward of the rod box. Furthest aft Put a 30 degree straight back, just forward of that put a 0 degree and a 0 degree forward of the rod box. Use outrodders in the 0 degree holders.

You can also mount surface mount rodholders in various places around the motorwell.

My gunnel is modified so it looks very wide but heres a pik to give you an idea.

I don't think you can put flushmounts in the motorwell and have clearance for the battery/oil res/bilge pump.

OK...sounds like there would not be enough wood left for a sturdy mount using these Mate rod holders? Do standard flush mounts use a smaller hole?

Thx, Bill