|
|
#10
10-17-2011, 04:38 PM
|
||||
|
||||
More transom prep. Is it ok to add some 1708 to the inside of the skin on the transom to thicken the skin before i glue my first sheet of ply? I had to grind a good bit of "dry" unsaturated chop strand to get down to a good surface for adhesion purposes. I have read the factory thickness of the outer skin should be about a 3/16 to a 1/4 of an inch.
Last edited by Kracker Jack; 10-17-2011 at 04:49 PM. 
|
|
|
Threaded Mode