|
|
|
|
#2
05-09-2013, 08:59 AM
|
||||
|
||||
Quote:
I believe there is a grounding screw/lug on the other side. I remember hooking up the wire so there must have been something but I cant recall. I can take a look tonight and let you know for sure. I also believe if I recall that 2 of three holes lined up and I had to drill a new hole for the third screw. or maybe I just used one hole and drilled 2 new ones. I do remember that the flange just barely covered the old holes but it did.
__________________
1986 V-20 1986 Yamaha 150 HP 
|
|
#3
05-09-2013, 09:02 AM
|
|||
|
|||
|
I had to replace the whole thing as well...don't know where Wellcraft came up with the original ones, must have been a special run.
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#5
05-10-2013, 01:44 PM
|
||||
|
||||
|
Quote:
It probably has something to do with plastic tanks vs metal tanks, but in all cases I personally like to err on the side of safety. So for me the grounding wire stays.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#6
05-10-2013, 03:06 PM
|
||||
|
||||
|
now that I think about it I may have hooked up the grounding wire to the back of one of the mounting bolts/screws.
__________________
1986 V-20 1986 Yamaha 150 HP
|
|
#7
05-10-2013, 09:13 PM
|
|||
|
|||
|
FEDERAL LAW
183.572 - Grounding Each metallic component of the fuel fill system and fuel tank which is in contact with fuel must be statically grounded so that the resistance between the ground and each metallic component of the fuel fill system and fuel tank is less than 100 ohms. I grounded mine to my ground bar in the Cuddy ... http://www.uscgboating.org/regulatio...rds_partp.aspx
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
