Starboard question.............

[macojoe]

You use just regular wood tools, Router, Table saw, Jig Saw, Drill bits, Ect Ect Ect...

When using a jig saw you want to try to move fast because if you go slow the plastic melts and gules it self back toghter, sior you to cut again.

You can't glue anything toghter all must be screwed toghter. Pre drill your screw holes.

when using for floor covers and hatch covers leave a little wiggle room cause it does expand slightly in the heat of the day.

eveything in red is starboard on my boat!





And this great Tackle Box built by CB and I and built in to the front port dash, as you can see in the pictures, its all screwed toghter with SS Wood screws.







You can see more pictures in my gallery!