Bottom Paint Removal

[Blu_Lunch]

I need some advise again. I want to remove the 10 plus layers of bottom paint it is so old and dried out it rubs off blue in on your hand, after a day in saltwater yesterday the paint left the driveway blue after a powerwash. I was reading about a product called Removall 610. Has anybody ever used it, and if so how well did it work.......Thanks in advance..........Ted

[phester]

I'd be anxious to hear what that's all about. my boat was formerly moored/slipped a couple of seasons, the bottom paint isn't that thick,maybe 2 layers, but it is worn out to where you can see the white hull in some places....all in all it makes the whole boat look a bit shabby. [it looks great in the water] I REFUSE to get on my back w/ any sort of sander, let alone by hand, and sand it down...it's just not happenin'

[Blu_Lunch]

Here's a few links read them both....... http://www.dtep.com/sara.htm http://www.dtep.com/removall610.htm Looks like good stuff the paint could fall off in sheets......

[Skools Out]

how about this stuff Blu? it works for everything else i've stripped in the way of paint, epoxy, and body filler.

http://www.bondo-online.com/catalog_...sp?itemNbr=235

Avail. from Advance Auto for like $20 a gallon.

[Skools Out]

Hey Blu i have a gallon of it here to think of it i'll try it tomorrow if i get a chance on the bottom of my v20 and on my 250 Sportsman to if it works.

[WiseGuy]

I tried several things. *The more expensive, the less it worked.
Here's the ticket: *BIX (important to get the orange can) from Home Depot. *15 bucks for a gallon with spray bottle. * It will turn that old paint to soft butter in 15 minutes. *Good stuff.

[Blu_Lunch]

Skools out post how it works out. I can't open your link either.....maybe it's me......Ted

[Skools Out]

Blu that stuff works like nothing other

before


took some on a bush rubbed around for a sec


Let sit for 2 to 3 min then took wet towel and wiped off and here it is


Man this stuff works great and worked great on my V20 with black copper coat bottom

Here's a pic of the stuff from Advance Auto


Here's another link to Advance yikes it's gone up according to their website
http://www.partsamerica.com/ProductD...artnumber=2813

[Blu_Lunch]

Holy Chit!!!! That's the ticket....Thanks....did it leave a blue haze .......Ted

[Skools Out]

yeah it did but i took a little of the stripper and put it on a wet towel and then wiped it and haze was gone. you may could brush it on thick in small areas and then pressure wash it right off.