|
|
#1
|
|||
|
|||
Deck Drain / Bar sink Drain
I finally found those sink/bar drains that were mentioned that could be used for floor deck drains. They have them at Boaters World in Newark, De. Gonna go check them out first and see if they will work.
__________________
|
|
#2
02-16-2006, 03:36 PM
|
||||
|
||||
|
Re: Deck Drain / Bar sink Drain
You should see if they have some type of strainer that would stick up and screw in strong, I think those inside jobs will clog on very little normal boat debris
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#3
02-16-2006, 08:23 PM
|
|||
|
|||
|
Re: Deck Drain / Bar sink Drain
Well, I drove 88 miles to check out these deck drains that were listed on there site. When I got there is was...."sorry sir we dont have them in stock"
But will gladly order them for you. So I came home empty handed. I wanted to check the item out in person and see if they will work before ordering them, getting them and then working. Already waisted some money or trail and errors.
__________________
|
|
#4
02-17-2006, 12:17 PM
|
||||
|
||||
|
Re: Deck Drain / Bar sink Drain
Remove one from the boat and go to your local plumbing supply house, not lowes or home depot. They'll be able to match you up.
Airslot
__________________
Airslot Airslot's V-20 Gallery
|
|
#5
02-17-2006, 03:38 PM
|
||||
|
||||
|
Re: Deck Drain / Bar sink Drain
Make sure the metal is STAINLESS and not chrome-plated somethin' else... ;)...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#6
02-17-2006, 03:53 PM
|
||||
|
||||
|
Re: Deck Drain / Bar sink Drain
Actually, get brass.
Airslot
__________________
Airslot Airslot's V-20 Gallery
|
|
#7
02-18-2006, 11:27 AM
|
||||
|
||||
|
Re: Deck Drain / Bar sink Drain
Brass as long as it's not plated...sooner or later that ol' salt gonna find its way thru plating and then it'll peel away like a stripper in heat...only won't LOOK as good!!! ;D ;D ;D
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#8
02-18-2006, 11:34 AM
|
||||
|
||||
|
Re: Deck Drain / Bar sink Drain
The drains I got are solid brass, not plated and look like new after 3 years.
Airslot
__________________
Airslot Airslot's V-20 Gallery
|
|
#9
02-20-2006, 03:15 PM
|
||||
|
||||
|
Re: Deck Drain / Bar sink Drain
Sounds like a good way to go... ;)...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
 |
|
|
Linear Mode
