|
|
#1
02-10-2008, 06:49 PM
|
||||
|
||||
Anybody interested in a Hydraulic steering install writeup?
I think I'm going to install hydraulic steering on the V and was wonderiing if you guys would want me to do a writeup? I'll probably pull the trigger on it this week. I may wait until after the boat show...you know, just to make sure I still have the V. If so, I may have to wait for Kevin to swing my Merc out of the way and hang that new Opti...
 Oh, forgot to tell you guys...I've been pretty absent lately due to my new JOB keeping me super busy  'Slot
__________________
Airslot Airslot's V-20 Gallery 
|
|
#2
02-10-2008, 06:59 PM
|
||||
|
||||
|
Air Iam having hydrallic steering put on my boat as we speak and a new fuel tank Iam going to see the guy tomorrow I will take some pics and post tomorrow...
Whats this about a new job? same place or new ??? need info and good luck where ever your at.
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#3
02-10-2008, 07:12 PM
|
||||
|
||||
|
I'm in the same place. Been moved to Top Dawg. General Manager is the new title. It's gonna be a heck of a year
Got a new office, but still have the old one over teh swimming pool as a satellite 
__________________
Airslot Airslot's V-20 Gallery
|
|
#5
02-10-2008, 08:03 PM
|
||||
|
||||
|
Yes
Write it up and you know post lots of pictures! Billy Mac
__________________
 Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
|
#6
02-10-2008, 08:25 PM
|
||||
|
||||
|
My 250 Sportsman has hydraulic steering, when we bought the boat it was effortless to turn the motors but it slipped. I put hydraulic oil in and now it doesn't slip but is not as effortless. Could that be because of air in the lines? Before i put fluid in, the fluid was below the valves. Is anybody planning to have the power hydraulic steering installed?
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#7
02-10-2008, 08:34 PM
|
||||
|
||||
|
Air
I have hyd steering on my 91 V-20 I/O. I love it. Mine came with it when I bought it. If you need Pics, let me know and I'll shoot whatever you need to look at. Garage
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
|
#8
02-10-2008, 08:57 PM
|
||||
|
||||
|
Thanks for the offer GNC. I've installed a couple of these before, so I got it pretty well covered.
__________________
Airslot Airslot's V-20 Gallery
|
|
#9
02-10-2008, 09:18 PM
|
||||
|
||||
|
my motor had to come off the boat to get the old steering off . thats what i was told anyway.
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#10
02-10-2008, 11:27 PM
|
||||
|
||||
|
Yep, motor has to come off, or cut the cable into short pieces
 . Mine needs to be raised two holes anyway,plus I am working a possible deal on an Optimax...we'll see what happens
__________________
Airslot Airslot's V-20 Gallery
|
 |
|
|
Linear Mode
