![]() |
|
#1
|
||||
|
||||
|
Anybody on this site have a bad voltage regulator? I remember that I was going to look up a few tests for somebody right after New Years, but I forgot. How ya doin Hammer ;D
Airslot
__________________
Airslot Airslot's V-20 Gallery |
|
#2
|
|||
|
|||
|
Yo Air, Waiting for the overtime check to come in, before I check out and replace my volt reg. Been seeing low prices and totally off the wall prices on the volt reg. Hopefully within a few weeks I'll get her done.
__________________
|
|
#3
|
||||
|
||||
|
OK my man. If you need a hand testing to make sure your swapping out the right part, just shout reeeeel loud. ;D
Airslot
__________________
Airslot Airslot's V-20 Gallery |
|
#4
|
|||
|
|||
|
Does your alternator have 1 wire or 3 wires to it? If it's a 3 wire, you need to find which one is for excitation voltage. Hook a volt meter up to the main outlet wire and start the engine. Connect 12volts from the battery to the excitation lead and if your voltage jumps to 14-18v+, your voltage regulator is bad. If the voltage stays the same, something else in the alternator is bad.
|
|
#5
|
||||
|
||||
|
GMC - He's got a 200 merc w/ the reg built into the rectifier. 5 wire deal I believe.
Airslot
__________________
Airslot Airslot's V-20 Gallery |
|
#6
|
|||
|
|||
|
what kind of motor do you have i have a 1988 150 merc o b and there is a rectifier and voltage regulator the rectifier is cheap about 35 dollars the voltage is more money but i would check the wires on the voltage regulator first and clean them they could be corrodid
__________________
love to fish |
|
#7
|
||||
|
||||
|
Answering for Hammer, he's got an 86' 200 Merc. I've got the same 88 Merc 150 as you do.
Airslot
__________________
Airslot Airslot's V-20 Gallery |
|
#8
|
||||
|
||||
|
GMC everything isn't a GM motor lol
Hammer post a pic of your regulator i may have one.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#9
|
|||
|
|||
|
check the conections on the voltage regilator is mounted on the top of the motor with a couple of wires clean the terminals and check to see if there corroded you might have to change it and the rectifier also
then you should be good to go
__________________
love to fish |
![]() |
|
|