Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Unread 10-15-2007, 09:12 AM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default Second attempt

Put the boat in Saturday to adjust the rpm’s and do a general shakedown.
The first trip of the day was an absolute abomination.
Noticed a strange intermittent vibration on occasions. Pulled the cowl off and the air damper was loose.
Figured it would be better to pull it out the water to work on it.
After being in the water for only 45 minutes back on the trailer we go.
Not that you can tell much by the picture but two of the ¼” bolts had came out completely and not one but both of them got sucked down the throat of the lower carb.

The red arrow is one of the bolt heads (the second is behind the first) and the blue arrow is one of the locations where a bolt came from.

After performing a double miracle by removing them and retightening them, back in the water we go.

After burning up about 10 gallons of fuel testing the engines performance, we realized it was occasionally skipping and generally running rich.
Figured it best to tie back to the dock and wait for high tide tomorrow to pull it back out.
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:11 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.