Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Performance
Register FAQ Community Calendar Today's Posts Search

Reply
Thread Tools Display Modes
  #1  
Unread 06-12-2007, 07:18 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default 4200

Need some input on useing this instead of Marine Tex in some locations. It's evervthing 5200 fast cure is except it's sandable and they do suggest useing the whole tube once opened.
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #2  
Unread 06-12-2007, 07:56 PM
shicks007's Avatar
shicks007 shicks007 is offline
Senior Member
 
Join Date: May 2004
Location: Yorktown, Va
Posts: 730
Send a message via ICQ to shicks007
Default Re: 4200

Tsu,

Are you talking about using this as a putty? Iv'e always used it as an adhesive.
__________________
If your not living on the edge.....your taking up space.
Reply With Quote
  #3  
Unread 06-12-2007, 08:02 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default Re: 4200

Yes. My thought if it is sandable it must be as good as Marine Tex for a filler or the like.
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #4  
Unread 06-12-2007, 08:03 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default Re: 4200

4200 is an adhesive sealant for above the waterline as I recall. If your trying to fill in some voids, this isn't the stuff.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
  #5  
Unread 06-12-2007, 08:05 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default Re: 4200

Therm, it is good above and below the waterline but I'm primarily planing to use to fill holes from the cleats and bow rail supports that I have removed instead of mixing Marine Tex.
In my mind if it comes out the tube ready to use, does the same as 5200, is sandable and dries in 24hrs, it should work a lot easier.
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #6  
Unread 06-12-2007, 08:09 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default Re: 4200

It is a silicone though, and silicone will always be a pliable type of material like rubber. If your trying to fill voids, this isn't the stuff. You need some sort of marine-tex, formula 27, or even a good polyester filler will work. Or you can always break out the glass and resin ;D.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
  #7  
Unread 06-12-2007, 08:12 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default Re: 4200

Ok, I had no idea it was a silicone. Thought I found a short cut. Thanks, Benny
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #8  
Unread 06-12-2007, 08:21 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default Re: 4200

Here's the reverse of the pack, for future reference.
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #9  
Unread 06-13-2007, 01:53 AM
macojoe's Avatar
macojoe macojoe is offline
Administrator
 
Join Date: Mar 2003
Location: Carver, Ma.
Posts: 15,859
Send a message via AIM to macojoe Send a message via Yahoo to macojoe
Default Re: 4200

I have used it for fill and it is ok for a while but you will have to do it again! It will also turn yellow after a while.

Use marine tex for small voids, cause it is $$ For a big hole use some formula 27 and top off with marine tex.

For small screw hole's I use Golf Tees diped in some resin or 5200 and then hammer into the holes. when dry top off with a little marine tex and you good for ever!
__________________
1986 V20

Old Fishermen never die, we just SMELL that way!!
Reply With Quote
  #10  
Unread 06-13-2007, 10:06 AM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default Re: 4200

do the same as you would 5200, first take a small dab on your finger and spread it in your hair( its going to get there sooner or later) them put some on the back side of your arm where you can't see it till you lean up against something.
Reply With Quote
Reply

Tags
4200


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:19 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.