|
|
#1
|
||||
|
||||
v-21 WINDSHIELD SUPPORT BRACKET
Would anyone here happen to have a pair of nice, not corroded windshield support brackets? I have found a source for the original black support rods themselves just need these brackets. Thanks! Dave
__________________
Dave Moore,Eastern Shore of Virginia 1996 V-21 #2 
|
|
#2
11-29-2023, 12:23 PM
|
||||
|
||||
|
Dave if you find some let me know I need a pair also!
__________________
 1994 Wellcraft V21
|
|
#3
11-29-2023, 04:09 PM
|
||||
|
||||
|
I'm on it Blue! But it's proving to be a tuff one! Luckily Great Lakes Skipper had the original supports. They come with the chrome plated ends but not the pieces that screw DIRECTLY to the windshield with a black plastic gasket.
https://www.ebay.com/itm/404636089963
__________________
Dave Moore,Eastern Shore of Virginia 1996 V-21 #2
|
|
#4
11-30-2023, 10:08 PM
|
|||
|
|||
|
Good luck on that
What I did I got Bimini hardware, the base,the tube end and a 7/8 or 1 inch tube and made my own out of stainless steel. To get a replacement arm is hard ,I could not find it long enough so I made my own and it works perfectly The only thing to watch is when you screw the base in to the window frame be very carefull I used long screws and it cracked the window ( been replaced ) so use short screws and you will be fine Make your own.
__________________
love to fish
|
 |
|
|
Linear Mode
