|
|
#1
|
|||
|
|||
I hit the lottery,,,,,kind of ?
So today I put my steering cable in without taking the motor off, I cut a notch in the side of the hole that it comes thru and moved the tilt tube to the left, that's when I got almost screwed I got the cable in, very hard to do that but I got it and the tube went in to much and the engine moved down just enough that I could not get it lined up so after sweating and asking my beautiful wife to give me a hand She hit the port side of the tube while I aligned it from the starboard side and it went in Great but I thought I screwed up the threads I didn't got it all back together And guess what
She steers great I hit the lottery kinda I know there's a lot I wrote maybe this will help someone Got it on without removing the motor Nice
__________________
love to fish 
|
|
#2
07-10-2016, 03:34 PM
|
|||
|
|||
|
Every now and then, everyone deserves a win.
__________________
-Steve "Oar Chasm!" 1977 Wellcraft V20 Step OB cuddy. 1971 1350 Merc "Any damn fool can navigate the world sober. It takes a really good sailor to do it drunk." - Sir Francis Chichester
|
|
#3
07-10-2016, 06:36 PM
|
||||
|
||||
|
Once in a while even a blind squirrel finds a nut!
|
|
#4
07-10-2016, 08:15 PM
|
|||
|
|||
|
That is very true
__________________
love to fish
|
|
#5
07-10-2016, 08:55 PM
|
||||
|
||||
|
just be sure to cover that notch since that'll be the closest open hole to the waterline. I'm guessing there are quite a few V20s out there with the cable hole notched back to the transom.
__________________
1984 V20 "Express" & 2003 Suzuki DF140 (SOLD!) 2000 GradyWhite 265 Express YouTube/SkunkBoat https://www.youtube.com/channel/UC4F...znGospVOD6EJuw Transom Rebuild https://www.youtube.com/watch?v=EEz94NbKCh0 https://www.youtube.com/watch?v=Oe_ZmPOUCNc
|
|
#6
07-11-2016, 05:08 AM
|
|||
|
|||
|
It's covered thanks
__________________
love to fish
|
|
#7
07-11-2016, 06:50 AM
|
||||
|
||||
|
Quote:
__________________
Boatless
|
|
#8
07-11-2016, 07:34 PM
|
|||
|
|||
|
That's one mistake wellcraft made, they put the hole where all the cables and wires to the motor go not in the right depot, if they only moved it back four inches or bigger Getting the steering cable thru the tube is very hard
__________________
love to fish
|
|
#9
07-12-2016, 10:06 AM
|
||||
|
||||
Could you dremel or rotozip the hole bigger and get a bigger boot to cover the rigging maybe?
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
|
#10
07-12-2016, 08:04 PM
|
|||
|
|||
|
I did make it bigger ,I got the
rod In but I had to move the tilt tube as far to port to give me another 1/2 inch it was very tight but I got it then I had to move the tilt tube back in place that turned out to be a problem cause when I moved it to port the motor dropped a little so now the tube was not lined up, I had the align it to get the tube moving to starboard ,,, I was sweating but I got it. Now that I know how to do it next time will be easier Hopefully not for a long time When I first got my boat I had to change the steering cable and my friend andy came to help me cause I didn't know how to do it and he did it so easy it wasn't a problem, I wish I was in contact with him ,, he was good at fixing things And he never broke a sweat
__________________
love to fish
|
 |
|
|
Linear Mode
