![]() |
|
#1
|
|||
|
|||
|
I am looking to buy a complete side mouth Remote Control for my project engine. My motor is 1987 140 v4, complete with T&T switch if you have it please let me know the price including shipping. I did not wanted to hijack the previous thread posted here.
|
|
#2
|
||||
|
||||
|
what are you looking for? just the controler or it with cables or it with tilt trim cable wire as well or all?
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#3
|
||||
|
||||
|
HELLO Did you find one???
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#4
|
|||
|
|||
|
Sorry I did not see your previous reply, I have decided to take a new direction with the spare engine I am working on.
Thanks for the offer Skool I keep you in mind if I change plans, for now I have it fully assembled and ready for the power head. I was advised NOT to assemble the power head until I need it. My thought process is now to have the mid and LU fully assembled and keep the power head honed and lube, and ready for assembly. |
|
#5
|
||||
|
||||
|
hum why not put it together? just as you build it use a paint brush and Marvel Mystery oil on everything inside the block and it will be fine plus the MMO will burn out once you start it. you can compression test it without starting it leave the oil in it. once you start it the motor will smoke heavy white smoke first run and it will have a heavy sweet smell of that smoke.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#6
|
|||
|
|||
|
Ok I am now sold I will assemble it. I am looking for the remote with T&T, shifter and throttle cables plus harness cable regardless of length. Please let me know .. Thanks Skool
|
|
#7
|
||||
|
||||
|
I have an old set in the garage, red plug, pretty long. They are beat but if you want them I can drop em in the mail and send them your way. If you are interested let me know, I'll grab some pics.
-Svence
__________________
1984 V-20 Steplift 1998 Johnson 175 |
|
#8
|
||||
|
||||
|
guy here at work has complete set with tilt trim harness, red plug harness, cables, all in good condition unit is clean. the only thing i see is the plastic tilt trim switch part is cracked but it taped up and was working fine when i took it off his V-20 dually
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#9
|
|||
|
|||
|
I am please post some pictures.
|
|
#10
|
|||
|
|||
|
Quote:
|
![]() |
|
|