1987 140 v4, Jetting Question and clarification please !!

[nymack66]

Per my manual I need to jet as follows..
ORIFICE, intermediate, No. 16, starboard. 140 Models With 397908 Stamped in Cover Plate. (My configuration)

Physical layout of cylinders standing on the ground looking at the engine port=left starboard =right ...

Port cylinders 2<<<<>>>>>1 Starboard side
Port cylinders 4<<<<>>>>>3 Starboard side

Question is do I install the .16 jets this on the Starboard side of the engine which is cylinder 1 & 3 or 2 & 4 ?