1989 Yamaha 200hp ETXF Manual

[bksah2]

Hey guys anybody out there have the owners manual and factory service manual for a 1989 200hp ETXF yamaha ..if you do and wouldn't mind makeing me a copy i would greatlly appreciate it,, ofcourse i would pay you for your time ,materials,and postage..I have allways been and inboard/outboard guy so this thing is all new to me with its oil pump, remote oil tank ,low oil alaram,Lcd gauges etc.etc.etc if anybody can help it would be great.,,,, I think even the 175hp or 225hp is basiclly the same,,AGAIN THANKS

[captpete13]

the 225 is a little different but the 150,175,200 are all the same. Are you having a problem with the oil injection system? If so Yamaha makes a pretty good troublesooting flow chart that I could print out for you. But the factory manual is pretty big and would be a pain to print out entirely. I dont think a factory manual is available anymore from Yamaha. They are all online on their dealer network. I would check on ebay too. you might be able to find one there.

[bksah2]

Thanks captpete At this point in time I am not sure if the oil system works or not the boat the motor is on has 2 year old gas in it,,,and i wanted to check the motor so i temp. hooked up a portable tank with 50/1 mix want to ckeck compression and other things,, the digital gauges dont seem like they work propperly also,, like i said i know nothing about 2cyc motors and this things a beast i and trying to give myself a crash course asap thats why i looking for the factory service manual and owner manual, as far as the flow chart i will take it let me know if its easer to email it or fax it ..AGAIN THANKS

[captpete13]

Fax would probably be the easiast for me. As far as your guages go. Black is ground,green is tach signal,yellow is ignition 12v,blue is guage lighting. If you have a digital speedo the white wire is gas tank sender(pink wire). That should get you started. There are other wies that also go to the multifunction tach(oil sensor harness,trim harness). They should just plug right in.

[bksah2]

Thanks Capt I will send you a PM with the fax number ,,,also If the digital gauges are bad on the yamaha is it possible to change back to analog gauges thanks in advance for the fax

[captpete13]

yea thats no problem. Yamaha makes analog gauges or you can use any brand you want. But your going to want to keep your warning lights for the oil system. Yamaha does make a smaller stand alone gauge for that. I have a few tachs and speedos that would work with your motor. If you need one just let me know. I wont be back to work until Monday so thats the soonest I could fax.

[bksah2]

THANKS a bunch,, No rush and I will let you know on the gauges

[macojoe]

I gave my digital gauge to Bigshrimpin a while back, it was in good working order, I will ask him if he still has it.

[bksah2]

Thats Great,,,,Let me know on the gauge ,,,, Also if theres anyone out there that has the factory repair manual and they want to sell it i am interested

[bksah2]

I have a ton of analog gauges from boats in the past and i allways liked the analog,,,, so worst case i will try to convert to them