![]() |
|
#1
|
|||
|
|||
|
Hello all,
I have been reading posts for awhile now, finally joined.(yipee) Great site with lots of info and nice boats. I picked up a v20 last year that my brother found sitting on the side of the road. The boat had sat for 5 or 6 years, and when he showed it to me I knew I was going to buy it. So the owner and I made a deal and I brought it home. The owner didn't know much about the boat as his brother had given it to him and he never did anything with it. So I bought it blind had no clue if it would even run. I got it home and threw a battery in it and the engine turned over for a second and that was it. So to make a long story short I put a in a new starter, points and condenser, plugs, wires, cap and rotor. She fired up....Now the questions start which I will post another thread about. The boat is a 1982 with the merc 470. Thanks |
|
#2
|
||||
|
||||
|
Welcome to the board Lamont,
Where are you located ?
__________________
V20 1984, 150 Hp Mariner, 15 Hp Mercury. Canada, Quebec |
|
#3
|
||||
|
||||
|
Welcome to the site....boat looks pretty good for something that hasnt been used in such a long time.....according to those registration numbers look like we go ourselves another NY/NJ member.....I think we are starting to give those Carolina guys a run for their money.
__________________
1986 V-20 1986 Yamaha 150 HP |
|
#4
|
|||
|
|||
|
Thanks guys, I'm from upstste N.Y in the Elmira-Corning area right in the heart of the finger lakes
|
|
#5
|
||||
|
||||
|
I like the top, where did you find it. I would love to get one for mine.
|
|
#6
|
|||
|
|||
|
The top was donated to me by a friend who had a wellcraft 210. It sits low in the back but works fine. I would like to get longer support bars but then the side curtains won't fit.
|
|
#7
|
|||
|
|||
|
Welcome aboard. I wish I my top was like yours.
__________________
'78 Cuddy with '82/'88 Johnny/Rude 150 |
|
#8
|
|||
|
|||
|
Welcome to the site! Looks like you got yourself a nice one. It looks great. Some will tell you to snatch that 470 out but dont listen to them, they're really good motors if taken care of (like anything else). and they're good on gas!! I've been completely through mine, and learned alot while doing it. Theres nothing complicated about them. If you got any questions, let em fly. I would suggest changing the dist over to a Pertronix electrionic ignition, it really improves the performance of a 470/170 mercruiser. Best of luck with your new boat!!
Carroll F.
__________________
77 V20 cuddy with 170 I/O Mercruiser 72 16ft. Carolina w/a 25hp Evinrude |
|
#9
|
|||
|
|||
|
Wow lots of nice comments about my donated top, thank's.(lol) The funny thing is when I bought the boat it had a custom hardtop on it. Someone used plywood, fiberglass mat, and roofing tar to complete this project. It took 3 hours to remove this hiddious thing and I still have some resin and tar on the sides of the boat and windsheild frame that are proving hard to remove. I have pics of the boat with the hardtop somewhere which I will post when I find them.
|
|
#10
|
|||
|
|||
|
Hey, found some cellphone pics of my gem when I first looked at it. Check out the custom hardtop.....
|
![]() |
|
|