|
|
#1
|
||||
|
||||
Tinted Textured Transom Cap!
I'd first like to thank Stinky and Skools for their informative input.
This the original plastic transom cap.  This is what we found under it. *Wood was solid where we could get to it.  The Mac Attack is getting a new motor so we decided to rap the cap in glass before we had it mounted. *The 150 Force is removed.  My brother in law Dan, and partner on the new E-Tec, grinds out the old filler that has cracked through the years.  Puddy has been removed.  Cap was then sanded to remove the gel coat.  Holes were drilled in the top of the cap and all the wood that could be gotten to was treated with CPES. *CPES is an epoxy sealer like get rot.  The opening was then filled with 1/4 inch chopped glass and epoxy resin to fill the void.  This was then sanded to a rounded shape as Stinky and Skools have told us.  I then refilled the small holes or any openings with a paste made from talc like powder and epoxy resin.  The cap was sanded and then wrapped with glass tape. *I used two layers of tape because it is not too thick.  I then retaped the cap and applied a tinted talc paste with a paint brush. *The texture was acheived by using a plastic scouring pad.  Tape was removed before the texture coating was completely cured. *I'm pretty much satisfied with the project. *Time will tell! 
__________________
 Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug 
|
|
#2
05-06-2007, 09:49 PM
|
|||
|
|||
|
Re: Tinted Textured Transom Cap!
Mac, great work and great information on the step by step on th eprocess. Will help others out. I did get lost though. Did you mat over the outer skin ??, if you did, I cant tell. Thats a A+ Job !!!.
__________________
|
|
#3
05-06-2007, 10:03 PM
|
||||
|
||||
|
Re: Tinted Textured Transom Cap!
Hammer I used two layers of fiberglass tape, 3" and 6". The 6" was cut to fit. Billy Mac ;D
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
|
#7
05-07-2007, 12:19 AM
|
||||
|
||||
|
Re: Tinted Textured Transom Cap!
You did a great job there!! Better then I would ever had done!!
The only thing I would have done was over lap more, you are supose to go 3" past the repair all the way around, But I am sure you are fine!! This is going to go in the How to section when I get around to it!!
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#8
05-07-2007, 02:38 AM
|
||||
|
||||
|
Re: Tinted Textured Transom Cap!
looks great i have 3 others needing that come on over lol
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#9
05-07-2007, 08:28 AM
|
||||
|
||||
|
Re: Tinted Textured Transom Cap!
WOW, Mac!! Whadda nice job 8) ...and the step-by-step is very informative ;) ...well done...you may have inspired me to get rid of my ol' metal cap ::) ...
Can't wait to see pix of the big "E" hangin' on that purdy work!! ;D ;D ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
 |
|
|
CY 1984 V20 STEP LIFT I/O 470 MERCRUISER Wheeling, WV
Linear Mode
