Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Performance
Register FAQ Community Calendar Today's Posts Search

Reply
Thread Tools Display Modes
  #21  
Unread 04-02-2007, 09:30 AM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default Re: Suzuki DF140

Well the Johnzuki 140 works great on the V-20.

I got a top speed of 35 mph @ 6400 rpm, which means I need a 20 pitch prop instead of a 19p. (Recommended wot rpm is 5800-6200) I had 25 gal of gas, 2 adults, 3 kids, lunch, 2 tools boxes, 1 battery on board.

4700 rpm was 25 mph, 20 mph was 3900.

It got out of the hole like a rocket and got better that 5 mpg. *I ran about 40 miles and used a little over 7 gal.
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
  #22  
Unread 04-02-2007, 09:30 AM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default Re: Suzuki DF140

Well the Johnzuki 140 works great on the V-20.

I got a top speed of 35 mph @ 6400 rpm, which means I need a 20 pitch prop instead of a 19p. (Recommended wot rpm is 5800-6200) I had 25 gal of gas, 2 adults, 3 kids, lunch, 2 tools boxes, 1 battery on board.

4700 rpm was 25 mph, 20 mph was 3900.

It got out of the hole like a rocket and got better that 5 mpg. *I ran about 40 miles and used a little over 7 gal.
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
  #23  
Unread 04-14-2007, 07:41 PM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default Re: Suzuki DF140

Quote:
Originally Posted by randlemanboater
Well the Johnzuki 140 works great on the V-20.

I got a top speed of 35 mph @ 6400 rpm, which means I need a 20 pitch prop instead of a 19p. *(Recommended wot rpm is 5800-6200) *I had 25 gal of gas, 2 adults, 3 kids, lunch, 2 tools boxes, 1 battery on board.

4700 rpm was 25 mph, 20 mph was 3900.

It got out of the hole like a rocket and got better that 5 mpg. *I ran about 40 miles and used a little over 7 gal.

With just me and 15 gal of gas it ran 40 mph (GPS) at around 6500 rpm.....I am guessing on the rpm cause my tach only goes to 6K. I wonder where the rev limiter kicks in on this motor.

Anyway, drive it like you stole it, or rented it.
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
  #24  
Unread 04-14-2007, 07:41 PM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default Re: Suzuki DF140

Quote:
Originally Posted by randlemanboater
Well the Johnzuki 140 works great on the V-20.

I got a top speed of 35 mph @ 6400 rpm, which means I need a 20 pitch prop instead of a 19p. *(Recommended wot rpm is 5800-6200) *I had 25 gal of gas, 2 adults, 3 kids, lunch, 2 tools boxes, 1 battery on board.

4700 rpm was 25 mph, 20 mph was 3900.

It got out of the hole like a rocket and got better that 5 mpg. *I ran about 40 miles and used a little over 7 gal.

With just me and 15 gal of gas it ran 40 mph (GPS) at around 6500 rpm.....I am guessing on the rpm cause my tach only goes to 6K. I wonder where the rev limiter kicks in on this motor.

Anyway, drive it like you stole it, or rented it.
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:23 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.