who all has replaced there Rubrail - Page 3

V20Twin · #21 03-14-2007, 10:09 PM

$111.50 sounds like a pretty good deal to me

V20Twin · #22 03-14-2007, 10:09 PM

$111.50 sounds like a pretty good deal to me

Stinky_Hooker · #23 03-14-2007, 10:40 PM

Skools, I have priced em and thats a HELLUVA deal...Id jump on that like Willy on Lisa. ;)

Stinky_Hooker · #24 03-14-2007, 10:40 PM

Skools, I have priced em and thats a HELLUVA deal...Id jump on that like Willy on Lisa. ;)

lumberslinger178 · #25 03-14-2007, 11:39 PM

lol poor hammer :o

lumberslinger178 · #26 03-14-2007, 11:39 PM

lol poor hammer :o

Skools Out · #27 03-15-2007, 02:41 AM

Parker only use's black on black so i'm thinking about buying 2 sets and put one on the V20 as well. 51 ft is plenty for them.

Here's a pic of the 07 Parker 21 SE so here's the same rubrail

Skools Out · #28 03-15-2007, 02:41 AM

Parker only use's black on black so i'm thinking about buying 2 sets and put one on the V20 as well. 51 ft is plenty for them.

Here's a pic of the 07 Parker 21 SE so here's the same rubrail

spareparts · #29 03-15-2007, 09:24 AM

i put a black rub rail simular to the one on the Parker on my 17 Mitchell last year, even with my company discount( don't tell any one) I paid $150 for enough rub rail to do my boat, add in stainless machine screws( i thru bolted it as it was a rolled edge boat), nylock nuts and washers, I had close to $200 in the job before I was done. I did it by myself, but I will never attempt it solo again, it showed when it was finished.

spareparts · #30 03-15-2007, 09:24 AM

i put a black rub rail simular to the one on the Parker on my 17 Mitchell last year, even with my company discount( don't tell any one) I paid $150 for enough rub rail to do my boat, add in stainless machine screws( i thru bolted it as it was a rolled edge boat), nylock nuts and washers, I had close to $200 in the job before I was done. I did it by myself, but I will never attempt it solo again, it showed when it was finished.