|
|
#1
|
||||
|
||||
88' Merc 150 pics, for Hammer
Hammer, don't know if these will help, or if they are too late? *But, they are pics none the less and we all know you love yer pics... ;D
First, the starboard side of my motor:  Next, a closeup of the trim / tilt solenoids:  Now, a fuzzy closer-up of the top solenoid.  On this picture, there are two components centered. *The piece on the left is the rectifier / regulator.  It's probably different from your 86' I'm guessing? Airslot
__________________
Airslot Airslot's V-20 Gallery 
|
|
#2
02-22-2007, 11:07 AM
|
||||
|
||||
|
88' Merc 150 pics, for Hammer
Hammer, don't know if these will help, or if they are too late? *But, they are pics none the less and we all know you love yer pics... ;D
First, the starboard side of my motor: Next, a closeup of the trim / tilt solenoids: Now, a fuzzy closer-up of the top solenoid. On this picture, there are two components centered. *The piece on the left is the rectifier / regulator. It's probably different from your 86' I'm guessing? Airslot
__________________
Airslot Airslot's V-20 Gallery
|
|
#3
02-22-2007, 01:08 PM
|
|||
|
|||
|
Re: 88' Merc 150 pics, for Hammer
Airslot, great pics. and I think they will work. Like I said. I hear a clicking noise coming from the motor and no tilt, so I'm figuring I must replace the soliniod. Seen a used set on E-Bay for 40.00 bucks, but want to find out how much it is to replace with new.
Again thanks. ;)
__________________
|
|
#4
02-22-2007, 01:08 PM
|
|||
|
|||
|
Re: 88' Merc 150 pics, for Hammer
Airslot, great pics. and I think they will work. Like I said. I hear a clicking noise coming from the motor and no tilt, so I'm figuring I must replace the soliniod. Seen a used set on E-Bay for 40.00 bucks, but want to find out how much it is to replace with new.
Again thanks. ;)
__________________
|
|
#7
02-22-2007, 01:41 PM
|
||||
|
||||
|
Re: 88' Merc 150 pics, for Hammer
I belive that Blue Green Red & black are all for the trim. Black is ground so leave it alone, Red is the power. Blue & green is up and down.
In my Yamaha all i had to do was touch lets say green cause I for got. to the red and the motor went up, blue and the motor went down. That got the motor up for me to work on the tilt motor. I am sure it will work for you also. [red]BUT WAIT FOR SOMEONE THAT NO"S MERC[/red] cause I no want you blowing anything else up!! :o
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#8
02-22-2007, 01:41 PM
|
||||
|
||||
|
Re: 88' Merc 150 pics, for Hammer
I belive that Blue Green Red & black are all for the trim. Black is ground so leave it alone, Red is the power. Blue & green is up and down.
In my Yamaha all i had to do was touch lets say green cause I for got. to the red and the motor went up, blue and the motor went down. That got the motor up for me to work on the tilt motor. I am sure it will work for you also. [red]BUT WAIT FOR SOMEONE THAT NO"S MERC[/red] cause I no want you blowing anything else up!! :o
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
 |
|
|
Linear Mode
