HELP!!! (FOR MY FRIEND). - Page 4

phester · #31 10-21-2006, 10:02 AM

I've got the same motor, a little older [1992],3 blade no frills stock aluminium 15 x 17. Max RPM is around 5300 at 38-40 MPH. Max rpm is 54-5500 according to the manual. The boat came w/ a 15 1/4 x 15 but I feel the 17 is better all around performance. anybody know the weight of the of the v21?.....Blue, you hearing me??

phester · #32 10-21-2006, 10:02 AM

I've got the same motor, a little older [1992],3 blade no frills stock aluminium 15 x 17. Max RPM is around 5300 at 38-40 MPH. Max rpm is 54-5500 according to the manual. The boat came w/ a 15 1/4 x 15 but I feel the 17 is better all around performance. anybody know the weight of the of the v21?.....Blue, you hearing me??

Blue_Runner · #33 10-23-2006, 02:57 PM

I think its the same or very close to the same weight of the V20. I seem to have mis-placed my spec sheet ::)

I have one tacked to my office wall (normally). Now where'd I put that thing ???

Blue_Runner · #34 10-23-2006, 02:57 PM

I think its the same or very close to the same weight of the V20. I seem to have mis-placed my spec sheet ::)

I have one tacked to my office wall (normally). Now where'd I put that thing ???

Seacrets · #35 10-23-2006, 07:00 PM

Dry weight on a 1996 w/150 outboard is 2750 lbs. With a 200 hp Merc it'll run just under 51 mph running a 14x 19" pitch prop. This was taken from the Wellcraft website.

Seacrets · #36 10-23-2006, 07:00 PM

Dry weight on a 1996 w/150 outboard is 2750 lbs. With a 200 hp Merc it'll run just under 51 mph running a 14x 19" pitch prop. This was taken from the Wellcraft website.

Blue_Runner · #37 10-24-2006, 12:09 PM

Dry weight of hull only is 2300 according to the 1993 catalog specs.

Blue_Runner · #38 10-24-2006, 12:09 PM

Dry weight of hull only is 2300 according to the 1993 catalog specs.

Seacrets · #39 10-24-2006, 12:22 PM

The 96 wgt was with a 150 hp motor

Seacrets · #40 10-24-2006, 12:22 PM

The 96 wgt was with a 150 hp motor