|
|
#321
|
||||
|
||||
Re: 21 Project Part 2 The Finish is Coming
lol Reel this stuff is great too. but the epoxy i used wasn't to cheap it's $20 for the small 2 part kit
http://www.kbs-coatings.com/KBS-Gold...W{u8o7uKt6RSUg I'm going to ask $9500 for it. *what do you guys think? Do you think it will sell ??? I told the neighbor i was bringing it so he said he would have the fuel flow reader and radar gun plus GPS to get the numbers on the old girl, he ask which prop i had and it currently has a Stelleto 14.5 X 19 he said i will need a 15 X 21 for my hull he is the best prop guy i've ever seen, he can look at a hull and the motors HP and tell you the exact prop you need. He said with the 19 pitch it should run 60 mph but with a 21 should run 65
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's 
|
|
#322
06-06-2007, 08:15 PM
|
||||
|
||||
|
Re: 21 Project Part 2 The Finish is Coming
$9500 ain't bad at all!! :D ...you got it onna good trailer and goodness knows it's been done RIGHT ;) 8) ... If I was in the market, I come get it ;D ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#323
06-06-2007, 08:40 PM
|
||||
|
||||
|
Re: 21 Project Part 2 The Finish is Coming
If I was in the Market??
I am always in the market just have no cash :'( The thing here is not that it isn't a good price (cause it is) Its just finding the right guy that knows what he is looking at and can appreciate what has gone into it to get it to were it is!! Have a pic album showing the work in different stages on hand when they come look. And of coarse you can answer anything they come up with!! The right guy will show!!
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#324
06-07-2007, 01:05 AM
|
||||
|
||||
|
Re: 21 Project Part 2 The Finish is Coming
well thanks guys, Well sorry no pics but lastseveral days i've been getting her USCG ready Fire Ext, Oar, Throwable, mounted all seats, tank back in hull, fuel/water seperator installed, all hatch's installed.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#326
06-07-2007, 10:03 AM
|
||||
|
||||
|
Re: 21 Project Part 2 The Finish is Coming
Hmmm let's see.....new boat for $9500 - I think somebody's gonna get a hell of a deal IMO!!
I don't think you'll have much trouble selling skools ;)
__________________
 1994 Wellcraft V21
|
|
#327
06-08-2007, 01:56 AM
|
||||
|
||||
|
Re: 21 Project Part 2 The Finish is Coming
here's some pics
                           i haven't peeled the protective film off them yet but they are light tinted lexan  New Capacity Decal 
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#329
06-08-2007, 11:45 AM
|
||||
|
||||
|
Re: 21 Project Part 2 The Finish is Coming
no issues there, alot of smaller I/O's have fuel tank, motor, battery, and all in one compartment.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#330
06-08-2007, 02:35 PM
|
||||
|
||||
|
Re: 21 Project Part 2 The Finish is Coming
Thss getting better then the wet thread!!
Thast new guy should look at this!!
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
 |
|
|
CY 1984 V20 STEP LIFT I/O 470 MERCRUISER Wheeling, WV
Bottom's up!!!
Linear Mode
