Hammer's transom Rebuild

[Skools_Dual]

right on Air except you don't need a layer of cloth between the outer skin and the wood. best is to do as i did for my Sea Ox i called boat manufactors asking where they buy their transom wood cause todays boats are built with 1 layer of ply wood that's 2 in thick. i bought a 40 layer 2" thick 5 x 10 sheet from a place in Greensboro NC for $98 and cut my own transom. this is where Parker and Grady buy their transoms. Itis kill dried treated. If you can buy treated that was killed afterwards it is best but higher.