A Few Questions...

[Geekie1]

I have an 84 V20 and it has a 60 G aluminum tank. My tank is foamed in and I have installed a 24 G plastic tank that just fits in my live bait well. The reason for the 24 G tank is that the 60 leaks. The end of this season I intend pulling the 60 and either replacing it with a plastic belly tank or sealing the aluminum tank with Por 15 tank sealer. Antique car guys swear by the sealer and it is not effected by ethanol fuel. Car restorers like the sealer because "where are you going to buy a replacement fuel tank for a 1928 Pierce Arrow"? The sealer works with aluminum or steel tanks and costs about $150 for cleaner, etcher, and enough sealer for a 60 G tank! I will use the sealer if the 60 G tank isn't too far gone.