CANT TURN !!

[msbhammer]

Looks like its almost fixed. I shot it full of WD-40 and wiped things down to really see what I was looking at. I should degreese the whole engine down, but unsure about taking a hose to the motor afterwards and short things out with my luck.
I took Airslots and Bigshrimp advice and looked around. Bigshrimp mentioned a bracket of some sort you can add, I like to see what you got. Picture if you can. I took off the top arm and the motor moved freely from side to side. I then seen a second place to where I can mount that top control arm. By relocating the arm farther back, it made the motor turn more. Not all the way, but better. My control is 11" and it looks like I need something in the 13 1/2 range, but looking at one of the pictures, I only have 1 1/2 of play left before that sliding arm hits the transom. So it looks like something around 12 1/2 " in a longer arm or see about this type of free glide adapter that Shrimp mentioned. Here are some pics and you can see where I managed to get more turn .
Thanks again for the tips. Tips are so much cheaper then the $85.00 an hour repair shop. ;D
Before Pic.