|
|
#18
04-17-2006, 11:26 PM
|
||||
|
||||
Re: Cutting Aluminum
Well guys thanks for all the info, used a combo of circular saw with a cutoff type blade to score the 1/2 " aluminum deep and a sawzall with a metal blade and it worked well. Ground down smooth and painted with white industrial spray paint to cover bare metal. Because of taking off the metal I was able to lower the motor 2 3/4" , should be enough to keep the prop down in a good chop now.
Got new GPS installed with external antenna, new LED Nav lights on bow and new horn installed. As soon as the bracket gets here I will install my Suzuki 9.9 kicker motor and then its off to the happy fisheen grounds for Willy ;D
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW 
|
|
|
Threaded Mode