Re: Lucky Scupper Here
OK the games over so back to the boat. I repaired this same cover over my fuel tank a couple of years ago. I used a dremel with a cutting wheel to cut around the underside of the hatch. Then I removed what was left of the water soaked and rotten plywood. Then I epoxied a new piece of plywood in place and cut the holes for the inspection covers using the hatch itself as guide. Next I coated all the new wood with epoxy and re-installed the hatch and used a light gray coler caulk to match the deck color. It's been a couple of years and so far it's holding up real well
__________________
Formerly - 89 cuddy 165hp I/O and 95 V21 / 150 Honda
When the people fear their government, there is tyranny; when the government fears the people, there is liberty. - Thomas Jefferson
|
02-06-2006, 01:56 AM
Threaded Mode