|
|
#1
|
|||
|
|||
prop survey
to all steplift owners only, this is what i need
1# what size prop are you furnning \2# what material, stainless steel aluminum? 3# what is your top speed 4# what is your rpm at top speed i will start 13 1/4 19 s.s. 27 mph 5800 i think i could do better with a differant size prop so instead of buying them all i will ask my friends who are wellcraft owners to help me out thanks
__________________
love to fish 
|
|
#2
06-30-2005, 10:54 PM
|
||||
|
||||
|
Re: prop survey
15 1/4" dia x 17 pitch
Stainless 42 mph On GPS @ 6000rpms ;D
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#3
06-30-2005, 11:06 PM
|
|||
|
|||
|
Re: prop survey
i forgot to tell you i have a 1988 150 mercury out board
__________________
love to fish
|
|
#4
06-30-2005, 11:09 PM
|
||||
|
||||
|
Re: prop survey
Yeah, that helps... ;) :D...figgered you'd get around to it... :)...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#5
07-01-2005, 04:04 PM
|
||||
|
||||
|
Re: prop survey
1989 Yamaha 175, * * * 15 1/4 X 15 * was runing a 14 1/4 X 17 till last week. Both Alum
Motor rated for 5500 rpm with the 14 X 17 I could get 35 mph at 5100 rpm with 3 people 65 gal gas and gear. with the 15 X 15 I get 30 mph 5500 rpm with same load The new *prop gives faster plane and out the hole, better gas, and better performance all around, + it works the motor better cause it revs at the 5500 that it supose to. The 17 pitch prop gave better speed on the top end but poor performance on the low end, faster troll, slower out the hole with prop spin, less gas milage and longer plane time The 5 mph loss is no loss to me!!
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#6
07-01-2005, 07:25 PM
|
||||
|
||||
|
Re: prop survey
My 05 Yammie 150 came with a 17" pitch. Im pulling 44Mph on my GPS at 5500 RPM WOT. *
That is with me alone and half a tank of fuel trimmed WAY up. I am debating going to a 15 pitch soon. MJ how slow is that 15 going for you ?? I need to slow down not make my eyes water, fish bite at 1.7 MPH not 2.4 Aluminum,, all fisherman should be running aluminum IMHO
|
|
#7
07-01-2005, 07:36 PM
|
||||
|
||||
|
Re: prop survey
I am getting about 2. which should be pretty good for me. They like it here 2 to 3 mph and I was always over 3 before.
I will be doing wire line soon and will no better how its goes.
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#8
07-01-2005, 08:15 PM
|
||||
|
||||
|
Re: prop survey
Hey, Strip...just curious...why should fishermen run aluminum props?... :)...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#9
07-01-2005, 09:21 PM
|
||||
|
||||
|
Re: prop survey
Fisherman should use aluminum props simply because you are going to find yourself in the rocks while fishing. An aluminum prop will take the damage as opposed to a stainless prop which will transmit the damage to the lower unit. The sacrifice made by the aluminum prop is much better than paying for a new lower unit.
completely IMHO of course,,, 8)
|
 |
|
|
Linear Mode
