Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Modifications
Register FAQ Community Calendar Today's Posts Search

Reply
Thread Tools Display Modes
  #11  
Unread 11-01-2015, 07:42 PM
SkunkBoat's Avatar
SkunkBoat SkunkBoat is offline
God
 
Join Date: Mar 2010
Location: Manasquan Inlet, NJ
Posts: 1,913
Send a message via ICQ to SkunkBoat
Default

yes , hard to justify the $ for a windlass on a V20.
I have an anchor ball and it works good but I usually just make the CREW haul it in.
If you have a good hinged roller you can stand next to the helm and hand over hand laying out on the deck, easy.

Plenty of room in Cuddy anchor locker for 3/8 line. I have 400ft in there with plenty of room for more but I keep extra 250ft in a 4gl bucket
__________________
1984 V20 "Express" & 2003 Suzuki DF140 (SOLD!)
2000 GradyWhite 265 Express

YouTube/SkunkBoat https://www.youtube.com/channel/UC4F...znGospVOD6EJuw

Transom Rebuild https://www.youtube.com/watch?v=EEz94NbKCh0
https://www.youtube.com/watch?v=Oe_ZmPOUCNc
Reply With Quote
  #12  
Unread 11-02-2015, 12:39 AM
scook's Avatar
scook scook is offline
God
 
Join Date: Jul 2005
Location: Portland, OR
Posts: 1,432
Default

Take a hole saw and drill some holes in the bottom of the bucket and some around the sides at the bottom for good drainage and air circulation to dry the line.
__________________
Scott, Portland, OR '85 V-20 I/O, Merc 170
Reply With Quote
  #13  
Unread 11-03-2015, 05:37 PM
fishingjim48 fishingjim48 is offline
Junior Member
 
Join Date: Oct 2015
Posts: 11
Default

Quote:
Originally Posted by scook View Post
Take a hole saw and drill some holes in the bottom of the bucket and some around the sides at the bottom for good drainage and air circulation to dry the line.
Thanks for the info, been working on boat for the last week, think I will enjoy the V20 when I get her ready..
Reply With Quote
  #14  
Unread 04-03-2022, 11:40 PM
fixit fixit is offline
Junior Member
 
Join Date: Apr 2014
Posts: 21
Default

I added a lewmar v700 to my boat a few years back. I love it! only thing I would change would be to mount it further to the stern. I could use more free fall length
Reply With Quote
  #15  
Unread 04-09-2022, 01:24 PM
ctmv20 ctmv20 is offline
Junior Member
 
Join Date: Jan 2021
Location: Downey CA
Posts: 12
Default windlass

I added a old powerwinch windlass to my V20 that I found on craigslist for $100 but have not had the chance to try it yet. It gets a little in the way of the top sliding door and I had to angle it a bit to use with an existing anchor roller I had. It also came with a foot switch I installed. I have used an anchor ball in the past but hope this will be much simpler and easier.

20220207_122334_HDR.jpg
Reply With Quote
  #16  
Unread 04-24-2022, 07:11 PM
ashokrags ashokrags is offline
Member
 
Join Date: Mar 2021
Posts: 44
Cool

Quote:
Originally Posted by fishingjim48 View Post
Talking about a round buoy attached to 3 or 4ft of rope with a ss ring on other end of rope. I don't want to get on the bow to retrieve the anchor
The previous guy who owned my boat had the anchor rope rigged such that he could drop it from the cockpit and retrieve from the side of the boat too. It was clever, but I was new and didn***8217;t note how he did it. He kept the anchor behind the drivers seat in a tub. He was kind of one of those folks who fish commercial on the side near Martha***8217;s Vineyard. The story was that hey once brought back 800-1000 lbs fish back with 4 fishermen on board.


Obviously anchor ball is a good option. I personally couldn***8217;t justify the cost of the windlass given the cost of the boat and that I am usually anchored in about 30-50 ft at most and I am ok with pulling it up, that***8217;s about the limit for me manually. If I ever were in a situation where I would need to anchor consistently in deeper waters say more than 100 ft I would think of the windlass. But that***8217;s pretty far offshore here and I don***8217;t think I would ever take the v20 out there in the first place.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:11 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.