Anchor bow roller install

[Destroyer]

Originally Posted by ashokrags

Could you post a image of where you installed the deck pipe. I bought this one

https://sea-dog.com/groups/2528-hinged-chain-deck-pipe
says line size 1" am hoping 5/16" chain will work with it.


Cheers
Ashok

WHY are you using chain, or is that just for the end of the rode? And for heavens ske, why 5/16"? This is a 20 foot boat that at best could be called either light weight or medium weight. It's not a heavy weight boat, and even if it were, for it's length you would only be using 3/16 PC (Proof Coil) chain with 3/8 nylon rope.

Personally, I like and use 1/2" nylon rope with 1/4 PC chain at the end, mostly because I like how it feels in my hands, NOT because of additional strength. Just pay attention to your line length (8:1 ratio) and you'll have no problems. Here's a good link for info on chain, line and all the hardware you will need. https://www.westmarine.com/WestAdvis...ur-Anchor-Rode