Finally. a new home for my V

[Destroyer]

Phat, welding is simple really. Without getting into the exotic types there are really only 3 main ones. Stick, MIG and TIG. (Not counting gas welding or brazing of course) MIG (Metal inert Gas) and TIG (Tungsten inert Gas) can weld Aluminum. Stick cannot. I could show you how to stick weld in less than an hour. Just have to watch your heat settings and your polarity, depending on what you are welding. MIG is just like flux core wire feed except that your have an inert gas shielding your work. Although you can use it for thick metals, TIG is usually used for the really fine stuff. 1/16" and thinner, and of course, Aluminum.

Just remember that:
1) Welding is dangerous... you're working with white hot melted metal... burns are common, as are tiny holes in the tops of your shoes. DO NOT wear sneakers... trust me on this one.
2) DO NOT, EVER weld without a proper welding helmet on. You can permanently blind yourself very quickly from the intense light and radiation.
3) Welding fumes are harmful. Weld in a well vented area and avoid having your head right over where you are welding.
4) Always wear leather welding gloves and long sleeve shirts. The radiation from welding is enough to give you a sunburn in a short period of time.