My first V20

[Destroyer]

Originally Posted by inaforty

I use an old Work mate bench by Black and Decker when servicing a lower unit.
Use the wood vise to hold the unit in place
Not sure it would work for all applications.
https://www.homedepot.com/p/BLACK-DE...M425/202516382

Barry, that's exactly what I presently use. Hoping that Scook's plans might be a little better.My biggest problem is trying to use straight clamping surfaces on a curved object. Never really secure and I don't want to clamp the skeeg because God knows they like to break.

I think I'm going to use a profiler and carve out two pieces of 4x4 wood that have the lower units profile (above the anti-cavatation plate) on the one side and a straight profile on the other. Use a router to carve a groove in the straight side to lock into the straight side of the Work Mate's clamping area. Should provide a good solid clamping surface.