|  | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Is this on a computer or app? From my phone I don’t see anything like this.
		 
				__________________ Current boat(s): 1985 V-20 Cuddy/ 470 IB/OB 1972 Egg Harbor 38’ Sedan/ 454 Crusaders | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			I plan on trying a pressure washer first. But something is telling me that’s what his dad tried right before he passed with little success. I bought some stripper but it’s been below freezing so doing it outside really isn’t going to go well. I believe that stuff uses heat to activate. It says on the can results decrease below 60F. I may be able to get it in my dads garage if I’m going to go the stripper route but won’t be able to sand and make a dust mess in there once the stripper is done. But from what I’ve seen online many people have had success with the paint stripper without affecting the gel coat.
		 
				__________________ Current boat(s): 1985 V-20 Cuddy/ 470 IB/OB 1972 Egg Harbor 38’ Sedan/ 454 Crusaders | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			Computer, I couldn't find it on the app either. I use the app on my phone to upload the pics and then use the computer to post pics here.
		 
				__________________ *************************************** Stay Safe! Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke. | 
| 
			 
			#4  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Hmmm... I’ll have to break out the old laptop and scrape the dust off of it. Been a while since I used it.
		 
				__________________ Current boat(s): 1985 V-20 Cuddy/ 470 IB/OB 1972 Egg Harbor 38’ Sedan/ 454 Crusaders | 
|  | 
| 
 | 
 |