Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Unread 08-09-2017, 01:08 AM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default

I seriously doubt timing is your issue. If it was to far retarded it simply wouldn't want to idle and stall out at low rpm's chugging blue smoke. And I've run them at full advance at idle with no problems setting timing. What you're describing is a lean sneeze which most likely means the carbs and jets need cleaned then a link and sync, then set your timing. Also of note, MANY of these old outboards need to be rejetted to run on todays fuels. And you have one of the toughest set of carbs to rebuild and not ruin in front of you with that engine. They are largely plastic, and many carb cleaners can danage them. Make sure whatever you use is plastic safe, be VERY carefull not to overtighten any screws and strip out a screw hole, and be EXTREMELY carefull tightening the 4 bolts that hold the carbs to the butterfly's. More of those carbs are junked by improper tightening of those 2 long bolts than anything else.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:55 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.