Wellcraft V20 Pilot house

[SkunkBoat]

Thanks for the pix.
Been daydreaming about that very thing for a while. I even got 3 pair of stainless heavy duty drawer slides from some scrapped cabinets at work. I like the way you routed the holes instead of one big hole with cabinet inserted. I have a cooler/bench seat blocking the bottom of that bulkhead though. Was thinking maybe have drawers inside the cuddy, sliding toward centerline.

[Big D MacG]

Couple more jobs done. Draws turn out great.

[scook]

Nicely done - for a metal guy, you did some good looking wood work (and of course the metal work is beautiful).

[mawshj]

just wondered, do the drawers have hold closed detents if so how did you do it ??

[Big D MacG]

I picked up the drawer slides at Home Depot. They are the soft close type. They suck themselves in the last inch and a half. Feels like it should be enough tension to keep them close in rough water. I was thinking of putting some locks on the right side of the drawers. The RV style ones like on the glove box under steering wheel.

[Big D MacG]

I put grab bar back up also. Dam bottom drawer hits speaker. Going to have to trim that bottom drawer.

[scook]

That's what makes it really custom

[Big D MacG]

New rub rail and bottom paint done. That rub rail rip insert was a job

[Destroyer]

I am officially getting jealous. Really nice work.

[Big D MacG]

Had a guy cut and polish boat. He put at least 5hrs into it. Turn out great