'79 teardown and rebuild.

[SkunkBoat]

Originally Posted by 3 Squids

My plan is to use all epoxy so that's gonna put a dent in the old wallet.

If you're going to pour Carbon Core, remember that it is polyester resin. You should use poly in places where they will contact the wet pour.

the rule...as I was told... is you can use poly on hardened poly, Epoxy on hardened poly and epoxy on hardened epoxy, but you can't use poly on hardened epoxy.

So your transom skins should be patched/fabricated/tabbed/coated using polyester resin. Then when that and the pour is all set, you can go over it with epoxy for strength