Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

Reply
Thread Tools Display Modes
  #1  
Unread 10-22-2016, 10:26 AM
Greyduk Greyduk is offline
Senior Member
 
Join Date: Feb 2016
Location: Alabama
Posts: 122
Default 1994 Mercury oil injection?

I just bought a 1994 Mercury 150. Is the oil in the reservoir tank injected directly into the engine? So that if I run the engine off of a 6 gallon tank I don't have to pre-mix? Thanks.
__________________
An adventure is a disaster that fails to kill you!!

1987 V20 Cuddy 175 Yamaha SOLD
1996 V21 Cuddy 200 OceanRunner SOLD
1994 V21 Cuddy 150 Mercury SOLD
Reply With Quote
  #2  
Unread 10-22-2016, 01:07 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

The oil in the tank under the cowling gravity flows to the oil pump. If you just bought it, i'd confirm the po didn't disconnect anything to bypass the oil injection. Just to make sure, i'd premix your pony tank at 50-1. Shouldn't hurt it to double oil it.

Edit: you didn't say if it was carbed or fuel injected
Reply With Quote
  #3  
Unread 10-22-2016, 01:46 PM
Greyduk Greyduk is offline
Senior Member
 
Join Date: Feb 2016
Location: Alabama
Posts: 122
Default

phatdaddy, Thanks for the input. The oil injection system is still operational,so I should be okay to just have gas in the 6 gallon tank it sounds like. You catchin any Spanish?
__________________
An adventure is a disaster that fails to kill you!!

1987 V20 Cuddy 175 Yamaha SOLD
1996 V21 Cuddy 200 OceanRunner SOLD
1994 V21 Cuddy 150 Mercury SOLD
Reply With Quote
  #4  
Unread 10-22-2016, 02:35 PM
Destroyer's Avatar
Destroyer Destroyer is offline
God
 
Join Date: Apr 2010
Location: Montville, NJ
Posts: 8,236
Default

Quote:
Originally Posted by Greyduk View Post
phatdaddy, Thanks for the input. The oil injection system is still operational,so I should be okay to just have gas in the 6 gallon tank it sounds like. You catchin any Spanish?
Different companies use different systems. On your engine the oil is mixed with the gas just before it goes into the carbs. Set up an aux tank with 50 to 1 mix. Look on the port side of the engine, you'll see the oil pump . look for the hose coming out of the pump that "t"s with the gas line near the bottom port side. Disconnect the oil hose from the "t" and put it into a small container. Start your engine running on the premix, and observe the hose you just disconnected. If your engine VRO is working properly you'll see about 6 drops of oil (or more) per minute while your engine is idling around 1000 rpm. No oil drip = bad.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.


If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God)

Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.

Last edited by Destroyer; 10-22-2016 at 02:47 PM.
Reply With Quote
  #5  
Unread 10-22-2016, 08:53 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default

Until you know it works, run it on pre mix. That system was very problematic to say the least. Many a Merc has died because of thst system and all the problems it had. And many times the alarm won't even go off when its messing up.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
  #6  
Unread 10-23-2016, 12:00 AM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

Caught one last week while trolling for grouper. Not really targeting them right now, trying to find a pompano. Been a real slow fishing fall so far. It finally cooled down.

How bout over your way?
Reply With Quote
  #7  
Unread 10-23-2016, 12:50 AM
garbubba garbubba is offline
Senior Member
 
Join Date: Apr 2004
Location: Vancleave, MS
Posts: 367
Default

Mine gave up that stupid nylon drive gear right in the Long Beach harbor over a dozen years ago. Had it neutered the next week & it's still running strong.
__________________
Doug

87 Cuddy with a 94 Black Max 200!
& a 1983 Cuddy, looking for power.
Reply With Quote
  #8  
Unread 10-23-2016, 07:16 AM
steplift20 steplift20 is offline
God
 
Join Date: Nov 2004
Location: Beautiful New Jersey the high taxes state
Posts: 3,042
Default

I'm still using my oil injection 1988 150 mercury No problems maybe I should keep my mouth shut I did have some issues one issue was there's a valve on the engine I think it's a check valve it would load up with oil and could not start the engine I changed the two valves Problem solved I would like to bypass it for safety reasons but I keep putting it off It runs fines What you can also do which I have done is while the engine is running loosen the cap on the oil tank that's on the engine and you should push out any air in there and then the oil should start to overflow Then you know it's working, the tank on the engine should be full
__________________
love to fish

Last edited by steplift20; 10-23-2016 at 07:17 AM. Reason: Spelling wrong
Reply With Quote
  #9  
Unread 10-23-2016, 08:46 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default

Quote:
Originally Posted by steplift20 View Post
I'm still using my oil injection 1988 150 mercury No problems maybe I should keep my mouth shut I did have some issues one issue was there's a valve on the engine I think it's a check valve it would load up with oil and could not start the engine I changed the two valves Problem solved I would like to bypass it for safety reasons but I keep putting it off It runs fines What you can also do which I have done is while the engine is running loosen the cap on the oil tank that's on the engine and you should push out any air in there and then the oil should start to overflow Then you know it's working, the tank on the engine should be full
That only tells you if the crankcase check valve is good and pressurizing the supply tank. The actual oil injection pump can still fail, no alarm sound, and bye bye engine. Mercury actually used a good system, but cheaped out on the 2.0/2.5l engines and used that nylon clamshell drive gear. Suzuki, yamaha, and the bigger Mercs all used a bronze crank gear, and they were very reliable systems.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
  #10  
Unread 10-26-2016, 08:20 PM
garbubba garbubba is offline
Senior Member
 
Join Date: Apr 2004
Location: Vancleave, MS
Posts: 367
Default

I was warned about that drive gear when I bought the boat. Pretty much ignored the guy, wouldn't you know it, he was in the boat when the gear gave out!
__________________
Doug

87 Cuddy with a 94 Black Max 200!
& a 1983 Cuddy, looking for power.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:57 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.