Slightly Twisted's new project

[Slightly_Twisted]

Got a few hours after work to get started on a few things this afternoon.
I had some extra polyester resin and cloth, I really wanted to glass in the cut stringers. I was really inspecting why the stringers were cut and I think it was done at the factory unless the deck was redone. I'm guessing but it looks like they were cut to level the deck. They were cut the whole way across and front to back, with the some type of sealant sealing the deck on. I'll try and get a photo of under the deck but it wasn't working with the iPad. Since I had the glass out I started on patching up the rod boxes as well. They were cracked on the edges. Got the winter cover on her, I went with the 15 year pool cover. The last thing is the galvanized pipes sticking up on the sides. I'm going to build bunk guides and use the pipe as attachments. I will also put my lights up on top of the rear one so they don't get wet. I will trailer the boat and ALWAYS have problems with the lights so I hope this helps.

I forgot how much I dislike sanding fiberglass.