Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Unread 06-04-2016, 06:52 AM
Redloon Redloon is offline
Senior Member
 
Join Date: Dec 2009
Location: Allen, TX
Posts: 111
Default

I had a 1984 Wellcraft 180 Fisherman and the plywood in the battery tray also rotted out. I don't think Wellcraft sealed the underside of the tray. I also found exposed wood in the stringers where they cut a v-notch in them for routing the fuel lines - I had the rod boxes removed in order to find that.

On my boat, there were cockpit drains in the back corners just outside the battery box and livewell on the other side. You might want to check the hose from the floor drains to the thru-hull if you have that setup (rod boxes were removed to gain access to the drains).

I replaced the plastic drain fitting and all plastic thru hulls with stainless steel fittings from Gemlux. I also replaced the hoses for peace of mind out on the water. I used 3M 5200 to seal the thru-hull fittings.

The plastic thru hulls and fittings break down with exposure to the sun.
__________________
1973 Mako 20' Center Console
1984 Wellcraft V20 Cuddy
1977 Wellcraft V20 Center Console
1975 Wellcraft V17 Center Console
1964 16' Super Skeeter with 55Lb thrust Motorguide Trolling Motor

1985 Glastron HPV-175 - sold
1984 Wellcraft 180 Fisherman - sold
1973 Mako 17' Angler - sold
1972 Mako 17' Standard - sold
1972 Mako 19' Center Console - sold
Always looking for the next one.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:11 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.