Quote:
Originally Posted by Destroyer
Check your Striper trailer again. Most trailers (matter of fact, ALL boat trailers I've ever seen) have the axle assembly in a sort of trough with predrilled holes in the side of the main frame. To change the position of the wheels you simply unbolt the axle assembly, slide it to the position you want and rebolt it through one of those other sets of holes. Point is you shouldn't have to buy anything... springs, hangers, etc. in order to adjust the axle position. You might want to check again. I think you'll be pleasantly surprised.  |
That's how the trailer my V is on is set up. However this one the spring hangers are U-bolted to the frame. A simple loosening of the U-bolts and sliding them back a few inches would be easy enough. But I seriously doubt the U-bolts will come free. I've been PB blasting them for a couple days so hopefully I'll get lucky. If I have trouble selling it I'll probably buy the 6 U bolts and take care of it myself. I read somewhere you get 10-15 lbs per inch of axle movement either way. I'm with MacoJoe though. I just do it til I can't lift it any more.
05-27-2016, 01:07 PM
Threaded Mode