|
|
#671
|
||||
|
||||
Shep Eastern Burlap are some stand up guys! They helped me out with alot of product info. I have found that alot of p r oblems with guys using poly is lack of prep and not using fresh greenish blue poly resin. Eastern burlaps resin fresh with minimal shelf life. The brown old garbage resins you buy from the box stores is a joke. The most important thing to do with poly is to perform wet on wet applications as much as possible.
|
|
#672
04-19-2016, 06:23 AM
|
||||
|
||||
 Oil changed.....lower unit oil done.....wheel bearing gone thru...brandnew tires....we are ready to roll!
|
|
#674
04-20-2016, 06:23 AM
|
|||
|
|||
|
Now thats a good looking center console!!!!!!
|
|
#675
03-06-2017, 08:21 PM
|
||||
|
||||
|
Well fellas the v is under the knife again. 2 years when i put the t-top on it was temporary meaning i put it on to fish taugs for winter with future plans of removing it and adding a ladder in the rear to allow me to acces the top for sight casting cobia and then powder coating the frame and putting a new top on the frame. Well that time has come. I got a smokin deal on a leaning post livewell so i incorporated my rear ladder/legs to bolts to the livewell/leaning post
  Heres what it looks like mocked up and ready to weld.Im also building my electronics box out of African mahogany! Its gonna be a sweet addition to the boat and look really good mounted on that white powdercoated t-top. Lots of pics soon to come. Last edited by Kracker Jack; 03-06-2017 at 08:28 PM.
|
|
#676
03-06-2017, 08:26 PM
|
||||
|
||||
|
|
#677
03-07-2017, 08:45 PM
|
||||
|
||||
  Hand picked this african mahogony for my electronics box. Will be finished clear to match my steering wheel base.
|
|
#679
03-07-2017, 11:02 PM
|
||||
|
||||
Comes a point where you're just showing off man.
J/K!! She looks great, If I mess around with another one it will be a 70's flat cap center console. Ps that box looks beautiful.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
|
#680
03-14-2017, 07:49 PM
|
||||
|
||||
 So the new livewell/leaning post is getting a little make over. I cut out and installed a insert for my fire extinguisher. And also cut out a access hatch out of the front of the leaning post for a small storage space. Cant have enough storage on a boat like this.
|
 |
|
|
Linear Mode
