Transom repair

[SkunkBoat]

OK! Poured the transom today!

Working on a video of the full project but here are some pics.

Had a problem but turned out ok.

In pics, watch the drain hole on the stringer. There were small holes between the transom & the bottoms of the stringers (plural) that I did not forsee.

Luckily paper towels stopped it up quick. Only lost about a pint into the bilge area.

2 buckets (10 Gal) reached to about 3 inches below the transom cutout.

It cooked for a couple hours. Solid as a rock now.

I will glass over the cutout and pour the rest tomorrow.