Spareparts spare parts for sale thread

[spareparts]

this is going to be an ongoing thread with lots of parts added as I dig them out of storage. If you are interested in any of these parts, you can PM me or email me at [email protected]. You can pay with paypal or send a check, nothing will be shipped untill payment has cleared. Shipping cost is on the purchaser. everything is located in Goose Creek, SC (near Charleston). a percentage of the total sales will be donated to keeping this site up and running. If you have any questions, send me an email

[spareparts]

Shoreline galvanized trailer $750. This was teh trailer that was under my V when I got it. Its in decent shape ad teh power winch worked last time I hooked wires to it. I'm trying to find a set of wheels to replace the painted ones on teh trailer now. The rollers are in decent shape. I couldn't get it to fit my boat like I wanted and was going to replace the rollers with bunks, but found a tandem axle trailer instead. The capacity plate is gone so I don't know the actual capacity. I'm guessing 3500 lbs. This is a SC trailer, meaning there is no title for it, I can provide a bill of sale and I have a bill of sale from the dealer I bought the boat from.







Swim platform off of my 20 Proline, plastic base, stainless is in good shape $35



Misc gauges, if you are looking for a particular gauge, email me and I'll sort thru them. Small gauges $25, large gauges $50

various marine hose, email if you need any





Vortec MPI Manifolds with injectors. I have three set ups, one with the throttle body, two without. These make an excellent replacement for a vortec 350 with the "spider" injection. Make me an offer, I just priced a set up out for an estimate on a Volvo 5.7, at list price, all the parts together end up being over $4000, I'll take much less. The two with no throttle bodies are new and unused, the one with teh throttle body came off of a 6.2 mercruier





factory manuals, I have plenty of them laying around, I've got a lot of OMC/Johnson?Evinrude/Sea drive stuff. I have some Yamaha and Mercruiser/Mercury as well. Most of these I never use. I am keeping the more popular ones though, many of which I have duplictaes adn will seel the duplicates. Price depending on the model(some manuals are pretty thin), $10-$40




Downriggers, I have 5 off them, Penns are $100 each, the cannon is $50. I don't have any of the balls or weights.




Stainless steel bow rail off of a V20(84?) $100, Unless you want to pick it up, i'll have to cut it in half at the peak so it can ship.

3.0L mercruiser engine, needs to be rebuilt, has one bad hole(dropped a valve) fresh water engine, good engine for a flat fender jeep. $150



5.7 longblocks, all late model roller cam motors, they have various issues. They will need to be rebuilt, $150 each









More stuff to come

[bradford]

My new favorite thread!

[cfelton]

Hey Spare, I'm interested in the bow rail. Do you think it will fit on my 77? And if you have any service manuals on the 170/3.7 mercruiser, I'd like to buy them! Always like extra resourses. PM me!

[bradford]

Any ETEC or Tohatsu service manuals? Figured it doesn't hurt to ask. LOL

[spareparts]

Originally Posted by bradford

Any ETEC or Tohatsu service manuals? Figured it doesn't hurt to ask. LOL

just kidding, sorry I don't have any those.

C Felton, I'll see what 3.7 manuals I have, I don't know on the bow rail, it came off of a raised deck, I'm not sure if it will fit a flat deck. I will tell you all that the odds of the feet on the bow rail matching up with your old one is pretty slim, just keep that in mind

[billbdavis]

Hey Parts, Know of cushions for my Step V cuddy? Bill @901-488-8426

[bcraigan]

You don't happen to have a decent outboard for a v20 do you? I am in the market for one for my dual console with the Gil bracket on it .