you said the motor does run when trimming up? Sounds like an internal oring gone bad, Make sure you have it full of fluid, you need to check it with the motor in the full up position, fill with a squirt can of light oil. If you know its full and wont trim up, there's an o-ring behind the large flat screw on the lower part of the trim system, there's one for up and one for down. One of those screws is on the rear facing side of the trim unit, the other one is on the transom side(you have to remove the engine or trim system). i can't remember which one is which
|
07-17-2013, 07:41 PM
Threaded Mode