Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Unread 05-01-2013, 07:09 AM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

take both screw plugs out, remove the top of the resevoir. Fill from the bottom plug, you'll have to get a pump when you pick up the gear lube, don't worry, its cheap. You fill from the lower drain hole till it comes out of the upper vent hole, then put that vent screw back in and fill till you have the level in the reservoir. If it doesn't want to fill the reservoir after you got it to the vent, you can just top off the reservoir, you will need to add some more after you run it. Biggest thing is to fill the drive from the lower drain hole, that keeps it from trapping air in the drive. You only have to be 6 or 7 ounces down to wipe out teh upper unit, that's why they added the resevoir
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:57 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.