Well if you refer to the pic above you will see a bunch of scattered parts. I cut the spotlight housing and trigger grip down to lose the excess plastic and weight. these pics show the picatinny mounted to the spotlight, and the scope rings reversed to mount to the scope.
this pic shows the spotlight charging. The switch you see between the battery and the spotlight is the trigger switch, it will be replaced with a pressure switch that I ordered off ebay that will be mounted by the grip of the rifle. the battery you see charging will be replaced by a old power wheels battery i have laying around for a spare for my daughters power wheel 4 wheeler the new battery will be will be connected to the spotlight with a 6 foot curly que chord. the battery will be divorced from the light and be stored in a bookbag.
04-30-2013, 09:55 PM
Threaded Mode