Replacing stringers while on Roller trailer

[tartuffe]

I should have asked if you are going to cut the floor out or pop the cap off. As you said, you replace the transom then the stringers. Replacing one stringer at a time will be a PITA. Its nice to get down to a clean slate before you start building back.

Your looking at a project thats probably going to take 6 months minimum if you are doing it on your off time. Might as well set up for the long haul. Heck, 4 piers of cinderblocks 2 blocks high with 4x4's would work so long as you have a good stable work platform with lots of straight andeven support you'll be good. Set up as low to the ground as possible is recommended because you will be climbing in and out 100's of times. I've ripped the crotch out of at least 3 pair of jeans.