|
|
#151
|
|||
|
|||
My suggestion would be to keep the strength of the design internal to the hull.
1.) Glue a wider internal edging as described (with sufficent width to glue to hull - screw up from bottm to attach plywood base for cap). 2.) Glue (hard as nails) foam on top of plywood with fiberglass columns previously discussed to provide support in three locations. 3.) Cover with biaxial for strength then a fine weave to smooth apperance making a clean seem line with 1" overlap to the hull on the exterior. 4.)Cover cap/hull seem line with rubrail of your choosing. Kamikaze
__________________
 74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process) 
|
|
#152
02-24-2012, 07:41 PM
|
||||
|
||||
|
So today I set the rail up and did ALOT!!!!! OF GRINDING!!!!!!! I will be glueing and glassing the ACX bands tomorrow. Im gonna glue it and thru bolt it then glass it all the way from the inside liner to the outside hull kinda creating a solid block all the way around the lip of the boat making a solid foundation to glue and screw my 3/4 cap to.
Kamikazi thanks for all your assistants and advice
|
|
#153
02-25-2012, 07:30 PM
|
||||
|
||||
|
KRACKER himself in action!!!
The handsom KRACKER himself!!!!
 
|
|
#154
02-25-2012, 10:21 PM
|
|||
|
|||
|
Looks dreamy....at least it looks like a dream sequence.
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#155
02-26-2012, 06:22 PM
|
||||
|
||||
|
so yesterday I glued up inner and outer bands(rail). Today I filled the gap between the 2 pieces with thickened resin and let it kick. I then sanded the top down and prepped it for my top strip of glass that will stitch the inner outer band together. And then glassed the strip. getting the angle right for my cap was kinda tricky, I used mostly eye ball. I have the cap angled to the outside the boat at about a 5 or 6 degree angle to direct wash over board.
Last edited by Kracker Jack; 02-26-2012 at 06:47 PM.
|
|
#156
03-01-2012, 07:32 PM
|
||||
|
||||
|
Here are some pics of the rough-in stage ofthe splash box Im building. Its 2 layers of 3/4 thats gonna be glued and glassed together.
|
|
#157
03-01-2012, 07:49 PM
|
||||
|
||||
|
Hey Kracker, if you're interested in that console, let em know. They may do something with that boat soon. I can probably get it as far as Raleigh for you if you want it
|
|
#158
03-02-2012, 08:16 AM
|
||||
|
||||
|
HD Brother..
__________________
 1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS
|
|
#159
03-02-2012, 08:26 AM
|
||||
|
||||
|
W/the splashwell in place, where does the water go that's gonna get into the boat?...sorry if I'm jumpin' ahead here>>>
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#160
03-02-2012, 10:20 AM
|
||||
|
||||
|
Quote:
|
 |
|
|
Linear Mode
